This alarm controller will be connected to the Honey Bee Bucket Alarm to turn off a pump or extractor when tripped by the alarm. This would mainly be used when transferring honey from a clarifier or when extracting with a large extractor. It will automatically turn that item off when the fill level is reached. The alarm will sound first (Approximately 4 1/2" from top) If not addressed the pump or extractor will shut down automatically when the second float is reached (Approximately 2 1/2" from top).
Mounting flanges are provided to mount the controller on the wall near your 110-volt outlet. Just plug this controller in a 110-volt outlet. Put the alarm on the container you wish to be monitored. Then plug your 110-volt machine or pump you are controlling into the controller. A small signal wire is then connected between the controller and the alarm. A 10ft. signal wire is included. If a longer signal wire is needed it may be purchased separately. All the additional signal wires are also 10 ft. unless a longer one is requested. The additional cord has an adapter to connect and lengthen the cord provided. You're all set to stop overflowing your storage containers.
